On Tue, 2018-07-17 at 08:06 +0200, hollundertee@gmx.net wrote:
> I noticed that I need to increase the output gain a fair bit to get a
> good level (roughly at 50%-60% whereas I have it at 20% with
> speakers).
If the input current should drop under too much load, you probably would
notice more bad effects, than just a quieter headphone output. The
culprit should be the headphone's impedance, but it's strange, since the
AKG K702 seems to have a low impedance and it should be a high impedance that should result in quieter headphone output. However, comparing the speaker's outputs and headphone's output loudness is insignificant, since external amplifiers are involved when using speakers.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Jul 17 12:15:03 2018
This archive was generated by hypermail 2.1.8 : Tue Jul 17 2018 - 12:15:04 EEST