Hi!
On Wed, 3 Oct 2018 12:51:40 +0000
Dale Powell <dj_kaza@hotmail.com> wrote:
> But my session configurations change all the time. I use QJackCTL to start Jack and pretty much everything autoconnects to the main two Jack outputs as expected. How would I change it so that instead of connecting to the System outputs to the audio interface they connect to the input of the MU1? Or is there another way to get it in the permanent signal path between Jack's System outputs and the physical audio interface?
if you enable Hardware Monitoring in Jack, you should get monitor_*
ports. You can use them to read whatever is sent to the hardware
outputs.
There are several db meters in the KXStudio repos, but I don't know of
one that works in the notification or indicator area.
Best,
Johannes
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Wed Oct 3 20:15:02 2018
This archive was generated by hypermail 2.1.8 : Wed Oct 03 2018 - 20:15:02 EEST