Re: [LAU] 192kHz soundcard?

On 12/7/18 9:46 PM, IOhannes m zmölnig wrote:
> hi all,
>
> i'm looking for a soundcard that can capture at 192kHz, preferably 4
> channels (at this samplerate), with phantom power.
> the frequency response should be fairly flat up to 85kHz (i'm mainly
> interested in the frequency range between 77kHz and 81kHz).

I tried the RME RayDAT with an external converter (Ferrofish A16 Mk II)
- the RayDAT works fine on Linux at 192 kHz also at low latency (round
trip delay about 1ms), and with the A16 you can get 4 channels, however,
they don't have phantom power or mic amps built in. Total cost is about
1.500 €, but if you have converters lying around the RayDAT is "only"
600. I did not measure the frequency response, but if you are interested
I could do next week.

Best,

Giso

>
> afaik the roland UA-55 (Quad-Capture) both supports the required sr and
> its anti-aliasing lowpass doesn't kick out my payload..
> the UA-55 seems to be discontinued, but i guess that the UA-1010
> (octa-capture) would also have suitable hardware (and is able to capture
> 4 channels @ 192kHz).
> however, from what i've found on various forums, both devices only have
> basic support on linux; esp i've read that they are only supposed to run
> in 44.1kHz, which - for my use-case - is a show-stopper.
>
> the UA-1010 is about 500€ which is nice enough (i don't think the
> project would be able to afford a 1000+€ soundcard).
>
> gfmdfx
> IOhannes
>
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@lists.linuxaudio.org
> https://lists.linuxaudio.org/listinfo/linux-audio-user
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sun Dec 9 04:15:02 2018