Paul Davis:
> It's bonanza time for anyone interested in some RME gear for use with
> "vintage" computers (defined as ones with a PCI bus. Yes, PCI. Not PCI(x)
> or PCI(e) or other later variant. Just PCI).
>
> What's available:
>
> RME Hammerfall 9652
> 3x ADAT in/out
> Daughterboard for word clock
> Breakout cable for 9-pin Sony protocol & S/PDIF
> Little-endian ROM chip installed, Big-endian enclosed
>
> RME HDSP9652
> 3x ADAT in/out
> (missing MIDI I/O breakout cable)
>
> RME Digiface
> half-height PCI card
> External breakout box, 3x ADAT in/out, S/PDIF, MIDI, word clock
> (nice long) Cable to connect
>
> Bonus:
> PCMCIA card for digiface, with required cable
> 2 x ADAT cables
...
Hello Paul, I have a:
http://www.thinkwiki.org/wiki/Category:T61p
and a PCMCIA card could suit me fine, but I don't know anything about
ADAT, and if I just need 4 mic or line in, and 4 line out, so this is
probably overkill, and I still need some analogue to ADAT converter.
Is this something that would be recommended or should I get something
else ?
I record the local choirs and such.
Regards,
/Karl Hammar
-----------------------------------------------------------------------
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Wed Dec 19 16:15:01 2018
This archive was generated by hypermail 2.1.8 : Wed Dec 19 2018 - 16:15:01 EET