On Sat, March 16, 2019 12:38 pm, olaf@klingt.org wrote:
> At least that is how it seems to be in this case with this device. (but I
> think i had 96k running even on usb1 devices before)
Did you hold down input 1 source select when you started the device? The
quick start guide indicates that will force the device into full speed
mode (i.e. 12Mb/s USB 1 speed rather than 480Mb/s USB 2 high speed).
The Sound Devices information seems out of date, the documentation
indicates that linux will only support full speed mode, but I think that
is not correct. If you held down input 1 select when powering on to force
full speed mode, do not do that, let the device initialize in high speed
mode. Linux USB driver has supported USB 2 audio class and high speed
mode for quite a long time.
-- Chris Caudle _______________________________________________ Linux-audio-user mailing list Linux-audio-user@lists.linuxaudio.org https://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Sun Mar 17 00:15:03 2019
This archive was generated by hypermail 2.1.8 : Sun Mar 17 2019 - 00:15:03 EET