Thanks Janette and Robin,
I'm a step further! In qjackctl in the ALSA tab I have to connect my Trinket
Midi device with Midi Through and in the MIDI tab I have to connect system with
setBfree. Afterwards I have to press Ctrl Middle mouse button on the volume
knob and the slider on my Trinket Midi device. Now I can tune the volume with
my external foot pedal.
After exporting the config.cfg I see the two lines
# modificaions on top of default config
midi.controller.upper.7=swellpedal1
Janette is obviously right that this is not the default behaviour.
Thanks again
Gerhard
On Sunday 25 August 2019, Robin Gareus wrote:
> On 8/25/19 8:37 PM, Gerhard Zintel wrote:
> > I'm trying to adjust the overall volume of setBfreeUI sending Midi
> > Control Change Message #7 with different values. Unfortunately setBfree
> > does not react to any of those commands.
>
> That is odd. CC7 is the default mapping for volume control. (MIDI
> channel 1-3).
>
> press 'm" to show bindings in the GUI. you can also ctrl+middle-click on
> the knob to learn a new message.
>
> > BTW: I assumed by clicking Ctrl and middle mouse button on the Volume
> > pot I could send a midi message to tune the slider
>
> yes, that is correct. It should show "move slider" and wait for input.
>
> Can you play it? Does the UI highlight keys as you play notes?
>
> ciao,
> robin
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@lists.linuxaudio.org
> https://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Mon Aug 26 00:15:02 2019
This archive was generated by hypermail 2.1.8 : Mon Aug 26 2019 - 00:15:02 EEST