dear Len, thanks for replying!
Am Montag, den 16.12.2019, 08:18 -0800 schrieb Len Ovens:
> On Mon, 16 Dec 2019, soffioalcuore@posteo.net wrote:
>
> > #zita-a2j -d hw:H4 -r 48000 -p 512 -n 2
>
> does the # mean you are running things as root? Jack and zita should
> only
> ever be run as a regular user and never as root/system.
no, # was just to identify the following as code/terminal output. sorry
for the confusion, now I'm aware I should better use $ for that.
> > and I can see the zita-bridge both in the graph window of qjackctl
> > and
> > in my daw (reaper).
> > the problem is that I don't get any signal from the device
> > connected by
> > the zita-bridge. I have also tried to change both devices - without
> > success. furthermore, I've tried to leave some of the parameters
> > (-p
> > and -n) out.
>
> By no signal you mean there is a mic on the input but the audio does
> not
> show up? (The meters on the device itself show level?)
exactly, that there's a signal (physically) incoming is indicated in
the 2nd device (and also in the 1st, as usual) but not in the daw, i.
e. its meters (but in the 1st). if I record from both devices, only
1st/master device's tracks have the signals/content, but the tracks of
the 2nd/slave device are empty.
> Does the signal ever show up on each device A) when not running jack?
> B)
> as the sole jack master?
a) yes, they normally do.
b) yes.
> Is the device you are using as jack master also the device you are
> using
> for monitoring? (output to speakers/heagphones?)
yes, by now, the master device is, as usual, the monitoring device. for
the moment I'm just focussing on the inputs.
> --
> Len Ovens
> www.ovenwerks.net
I hope that helps. thanks again!
christoph
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Wed Jan 1 02:17:00 2020
This archive was generated by hypermail 2.1.8 : Wed Jan 01 2020 - 02:17:01 EET