Re: [LAU] problem with zita-bridge to use two recording interfaces

On Tue, Dec 17, 2019 at 11:32:44AM +0100, soffioalcuore@posteo.net wrote:

> still concerned with the issue that zita-a2j doesn't work properly on
> my computers (I’ve also tried it with another machine, both run arch
> linux) I enabled zita-a2j in verbose mode which tells me:
>
> playback : not enabled
> capture :
> nchan : 2
> fsamp : 48000
> fsize : 256
> nfrag : 2
> format : S16_LE
>
> whilst "playback" is indicated to be disabled, "capture" lacks a state,
> at all.

What do you mean by 'lacks a state' ?

Is there any output after the lines you quoted, like

fons@zita1:~> zita-a2j -d hw:1,0 -v
playback : not enabled
capture :
  nchan : 2
  fsamp : 48000
  fsize : 256
  nfrag : 2
  format : S32_LE
Starting synchronisation.
  -0.151 1.000057 0
  -0.007 1.000034 326
  -0.053 1.000046 327
  -0.114 1.000094 327
   0.128 1.000019 328

etc. ?

This problem is quite mysterious...
I've got zita-j2a running on one of my machines at work, with
a Digico 48-ch MADI interface for two months or so without
interruption. Use it almost every day, no problems...

> I have uninstalled zita-ajbridge, restartet and reinstalled, but the
> problem persists.

Could you try jaaa -A or japa -A with the same sound card and
see if you get any signal in or out ?

Ciao,

-- 
FA
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user