On Thu, 16 Apr 2020, David W. Jones wrote:
>
>
> I've always used 3 buffers for my Behringer UCA202. That was the advice for using any USB audio device. Something due to USB, not a specific device.
With a USB device, there is not only a buffer size to SR relationship but
also the system USB transfer rate which is 1ms. 48000 at 16/3 is exactly
1ms (assuming system clock and media clock line up... which they don't)
so the theory goes that using 3 buffers makes things come a lot closer to
lining up with the rate the USB device is actually transfering your audio
data or at least make it a close multiple. By the time the buffer size is
64 it should no longer matter and two should be fine. experimentation will
show what works best for your system/device.
-- Len Ovens www.ovenwerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@lists.linuxaudio.org https://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Fri Apr 17 04:15:03 2020
This archive was generated by hypermail 2.1.8 : Fri Apr 17 2020 - 04:15:03 EEST