[LAU] Mackie 1640i i/o ports not detected in claudia, works with catia.

Hi,

I am using KXStudio repos on Debian Testing with Mackie 1640i firewire
interface on Lenovo Thinkpad T420.

I followed most of this
https://wiki.linuxaudio.org/wiki/system_configuration to tune my system
for audio work.

I am starting JACKd with cadence automatically on boot. Everything seems
to work fine with Ardour and even PulseAudio sink but when I run Catia
(version 5:0.9.1 from kxrepos) it detects my FW device and shows I/O
ports so I can patch connections but not showing the device and I/O
ports in Claudia (version 5:0.9.1 from kxrepos).

custom RT kernel 5.4.19-rt9-fw (I am using some patch to tune FIFO
buffer on my firewire controller and get less xruns but same issue
remains with stock debian RT kernel) with libffado 2.4.2-1.

Here is log from jackd: https://del.dog/raw/jackd_log [GREP FOR THE
ERROR LINES]. Possible important lines:

ERROR: firewire MSG: Streaming thread running with Realtime scheduling, priority 30
ERROR: firewire MSG: Registering audio capture port firewire_pcm:000ff2050000145b_CH1_in

If someone has some more experience with JACKd and know where to start
debugging process please do post reply. Thanks in advance!

AreYouLoco?

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Jun 12 04:15:01 2020