On 05/02/21 17:04, tom haddington wrote:
> Hello, Listers--
>
> I've successfully mapped two of my MIDI knobs to the filter's cutoff
> frequency controllers in both SubSynth and PadSynth. The problem is
> that in neither of these engines does the sound change continuously.
> The controller on the GUI moves when I twist the mapped MIDI knob, but I
> need to strike the key, again, to hear how the sound has changed.
IIRC you can't have continuous frequency / Q changes applied while the
note is on with SubSynth and PadSynth.
> Apparently, filter sweeps are not allowed in either of these engines?
> This is not a problem in AddSynth.
A way of achieving this kind of sweep would be to add an 'EQ' effect to
the instrument and MIDI automate the frequency (and/or Q) in the same
way you did it for the filter frequency (you need to select something
like a Low-pass of course...).
Hope this helps,
Lorenzo.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sun Feb 7 04:15:02 2021
This archive was generated by hypermail 2.1.8 : Sun Feb 07 2021 - 04:15:02 EET