Hi there,
Thank you for the information. Yes synchronisation is always an issue and
perhaps I framed the question inadequately, but what I am after is not
complete synchronisation but rather to utilise the analog ins and outs of
this additional soundcard too.
So I am not after 0ms latency per se, but rather something in the order
<12msec. This has been possible across soundcards using the alsa driver, so
I assume it is not out of place to aim for it now too. Perhaps this is not
possible across different jack backend which is why I ask for the various
setup possibilities.
The easiest for me would be to use the saffireLE through the alsa driver,
but that only exposes 1 single stereo playback stream. I want all 3. So
what do I have?
Thanks,
Nass
On Sat, 1 May 2021, 23:07 David Kastrup, <dak@email-addr-hidden> wrote:
> Athanasios Silis <athanasios.silis@email-addr-hidden> writes:
>
> > Finally, is there a chance to coordinate 2 jack sessions (each with
> > one of alsa, firewire backends) with 0 latency between them ? In this
> > setup does anyone have experience with SaffireLE and how to control
> > the mixer?
>
> How is 0-latency supposed to work with unsynchronised clocks?
>
> If you want to consolidate multiple soundcards without adding
> significant latency for resampling filtering, they must be running on
> the same clock (which means that it's mainly comparatively expensive
> soundcards that can be consolidated). Even then you'll not be able to
> split a stereo channel across two non-identical cards without
> introducing problems from the differing phase response of their
> oversampling and filtering circuitry.
>
> Synchronisation can happen in some cases via Firewire (for example, if
> you daisychain multiple Alesis i|O 26 devices) but more usually with a
> separate word clock sync cable.
>
> For juggling numerous sources, there can be a point in getting a mixer
> with digital multi-channel in- and output.
>
> That means you don't need to consolidate multiple soundcards but rather
> get to work with some flexible multichannel device. That tends to be
> quite more robust.
>
> --
> David Kastrup
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Mon May 3 04:15:01 2021
This archive was generated by hypermail 2.1.8 : Mon May 03 2021 - 04:15:01 EEST