> On Tue, Jun 21, 2005 at 01:17:21PM +0100, Dave Griffiths wrote:
>
>> * high dc offset
>> * very low frequency
>> * very high frequency
>
> Add 'High level at higher frequencies'. In most speakers
> systems, the HF unit will sustain considerably less power
> than the LF/MF parts.
added to the list - thanks
> High-end PA systems (using active crossover) can protect
> themselves by having separate limiters in each band. For
> a full range speaker system, ideally you'd want frequency
> dependant limiting. JAMIN will do this IIRC, if you can
> tolerate the delay.
I'd rather use jamin than write more code, but ideally I think I'd quite
like to get this sort of protection built into the selection of the
patches. It might be worth filtering it externally anyway I guess.
cheers,
dave
Received on Tue Jun 21 20:15:08 2005
This archive was generated by hypermail 2.1.8 : Tue Jun 21 2005 - 20:15:08 EEST