On Tue, Jun 21, 2005 at 01:17:21PM +0100, Dave Griffiths wrote:
> * high dc offset
> * very low frequency
> * very high frequency
Add 'High level at higher frequencies'. In most speakers
systems, the HF unit will sustain considerably less power
than the LF/MF parts.
High-end PA systems (using active crossover) can protect
themselves by having separate limiters in each band. For
a full range speaker system, ideally you'd want frequency
dependant limiting. JAMIN will do this IIRC, if you can
tolerate the delay.
-- FAReceived on Tue Jun 21 20:15:06 2005
This archive was generated by hypermail 2.1.8 : Tue Jun 21 2005 - 20:15:07 EEST