Re: [LAD] Adding a c timer to Kluppe

On 04/21/2010 05:49 PM, Louigi Verona wrote:
> Hey Patrick!
>
> This is exactly what I am trying to say - I had that buzz BEFORE you
> added delay function. If you take the original kluppe - it has the
> buzz too - if you route the signal straight from an individual loop
> audio outs.
> So if buzz is in individual loop audio outs - how come does it not
> appear from the main out?
>

To be specific we can hear the buzz in the following situations.

1: Manual pause on channel output
2: Delayed playback pause on channel output
3: Delayed playback pause on main output

We do not hear the buzz with manual pause on main output.

If anyone has an idea on why that may be possible I would appreciate
your insight.

The updated source for kluppe with playback delay in place is at this
address:

http://djcj.org/code/kluppe-0.6.14-playbackdelay.tar.bz2

To enable the delay you need to change the bottom right spinbox in the
spinbox grid panel for a specific loop.

Cheers.

Patrick Shirkey
Boost Hardware Ltd

> On Wed, Apr 21, 2010 at 10:12 AM, Patrick Shirkey
> <pshirkey@email-addr-hidden <mailto:pshirkey@email-addr-hidden>> wrote:
>
>
> On 04/21/2010 03:44 PM, Louigi Verona wrote:
>> You mean even from main out?
>>
>> Just to be sure I have explained well - if I route (in patchage
>> for instance) the signal from "main out", then I get no buzz
>> during pause. If I route from an individual loop out, then I do
>> get the buzz.
>>
>>
>
>
> Yeah, I don't get any buzz when pausing playback normally. Only
> while the delayed pause is in action.
>
>
>
>
> Patrick Shirkey
> Boost Hardware Ltd
>
>
>
>

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Wed Apr 21 16:15:02 2010