Re: [LAD] envy24control, resp. it's successor

On Tue, 2010-12-14 at 09:34 -0500, David Santamauro wrote:
> On Tue, 14 Dec 2010 13:40:43 +0100
> Ralf Mardorf <ralf.mardorf@email-addr-hidden-dsl.net> wrote:
>
> > On Tue, 2010-12-14 at 13:36 +0100, Ralf Mardorf wrote:
> > > On Tue, 2010-12-14 at 06:47 -0500, David Santamauro wrote:
> > > > Hi Niels,
> > > >
> > > >
> > > > On Mon, 13 Sep 2010 17:36:11 -0700
> > > > Niels Mayer <nielsmayer@email-addr-hidden> wrote:
> > > >
> > > > > On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf
> > > > > <ralf.mardorf@email-addr-hidden-dsl.net> wrote:
> > > > > >Pardon, I didn't follow the progress of envy24control. Did you
> > > > > >finish
> > > > > > the recently development and if so, where can we/I get the
> > > > > > latest source code?
> > > > >
> > > > > http:// mudita24.googlecode.com
> > > > >
> > > > > Status: still at 1.03. Waiting for Tim E. Real to commit and
> > > > > then will release 1.04. Or use Tim's current patches (see link
> > > > > above).
> > > > >
> > > > > Niels
> > > > > http://nielsmayer.com
> > > >
> > > >
> > > > ...quick question on the "Monitor PCMs" tab: Why are there 2
> > > > sliders per PCM out? Shouldn't L/R Gang join channels 1 & 2, 3 &
> > > > 4 etc...
> > > >
> > > > thanks for any insight...
> > > >
> > > > David
> > >
> > > I never use the monitor section. Could it be that it's to root the
> > > PCMs to the left or the right for the stereo sum, comparable to a
> > > mixing console's left/right buttons for the subgroups? Hence L/R
> > > Gang will make one PCM monitor mono for the stereo sum.
> >
> > PS:
> >
> > Note, there are no pan pots and you not necessarily will have PCM
> > monitor 1 to the left and 2 to the right, perhaps 1 should be mono
> > and 2 2 to the left, while 3 is to the right position.
> >
> > Just a shot in the dark.
> >
>
> I think I understand: by looking at the windows mixer app in the delta
> 1010 documentation, I see that there is one fader, but in addition,
> there is a pan slider per channel. I'm going to venture to guess that
> having both sliders in envy24control full up, it is the equivalent of
> the windows mixer app channel up and pan center -- this seems logical.
>
> * single strips and pan pots/sliders would make this clearer.
>
> David

Of course, but we should keep in mind, that we're talking about the
mixer for sound cards, but a mixing console or even a virtual mixing
console emulating a dj mixer or a professional mixing console. I never
used the monitor tab of the mixer for the sound card. I just use
envy24control and mudita24 to optimise the 'main' IOs of the card to my
analog mixing console, any mixing is done by apps and/or the analog
mixer, including monitoring.

Cheers!

Ralf

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Tue Dec 14 20:15:02 2010