Jörn Nettingsmeier wrote:
> I'm trying to get my Gigaport HD+ to run at 48000kHz. The specs say it is capable of 8ch @ 44k1/16, 6ch at 44k1/24 and 48k/24.
Please show the output of "lsusb -v" for this device.
> When I try to start it at 48k, it comes up ok but ends up running at 44k1. It shows 8 channels, so that's expected.
> Now, how do I tell it to use only 6, so that I can get to 48k?
> I've tried setting -o6, which gives the usual "cannot set playback channel count".
In theory, any supported combination of parameters should work with Jack.
Does it work with "speaker-test -D hw:3 -c 6 -r 48000"?
Regards,
Clemens
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Tue Feb 25 16:15:02 2014
This archive was generated by hypermail 2.1.8 : Tue Feb 25 2014 - 16:15:02 EET