Re: [LAD] [LAU] First release of zita-njbridge

On Mon, Aug 04, 2014 at 12:18:31PM -0700, Russell Hanaghan wrote:
 
> I'm curious... This application excites me based on the following theoretical layout:
>
> Budget studio with say at least 1 strong central DAW in a control room. Other satellite
> rooms tht can be linked with Gig Ethernet and smaller (cheaper) platforms in those rooms
> for maybe recording certain instruments (drums might be a bitch even at low latencies)
> an feeding those channels back to the master. Effectively replacing shielded audio cables
> (which run into real money) for a Cat5e or Cat6 cable and gig ports either side. Gig
> switches and cards have become cheap, especially compared to half decent shielded pair
> audio cable.
>
> Is this reasonable as it relates to the application?

I'm not entirely convinced by the cost argument, unless you'd wire
a lot of channels. You still need a PC and soundcard at the other
end.

But if you can live with the extra latency (which can be kept low
in particular if you use dedicated NICs and wiring), yes this
could be a use case.

Another use case for a studio would be to make the studio output(s)
available everywhere in the building - offices, bar, etc.

I originally developed this to be able to record concerts at the
concert hall of the CdM in the studio which is at the other end
of the building and on a different floor. Installing audio cables
or an optical fibre was out of the question, but there is network
wiring everywhere.

Ciao,

-- 
FA
A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev