Subject: [linux-audio-user] RME hammerfall
From: Kevin Ernste (kevine88_AT_yahoo.com)
Date: Fri Jan 25 2002 - 06:21:41 EET
Hello,
I am trying to run an RME Hammerfall card with ALSA 0.9beta 10 (under
Mandrake 8.1, kernel 2.4.8-26), and am getting what sounds like clocking
errors. I am using the IEC958 (spdif) coaxial connection.
I have the snd-rme9652_mem module loading very early in the boot cycle,
and /proc/asound seems to know all the right details, although it looks to
me like the ADAT is its default sync source (how do I change this?).
Here's my /proc/asound/card1/rme9652:
RME Digi9652 (Rev 1.5) (Card #2)
Buffers: capture df200000 playback df000000
IRQ: 5 Registers bus: 0xfd000000 VM: 0xe4894000
Control register: 244008
Latency: 1024 samples (2 periods of 4096 bytes)
Hardware pointer (frames): 0
Passthru: no
Clock mode: autosync
Pref. sync source: ADAT1
ADAT1 Input source: ADAT1 optical
IEC958 input: Coaxial
IEC958 output: Coaxial only
IEC958 quality: Consumer
IEC958 emphasis: off
IEC958 Dolby: off
IEC958 sample rate: 44100
ADAT Sample rate: 44100Hz
ADAT1: No Lock
ADAT2: No Lock
ADAT3: No Lock
Timecode signal: no
Punch Status:
1: off 2: off 3: off 4: off 5: off 6: off 7: off 8: off
9: off 10: off 11: off 12: off 13: off 14: off 15: off 16: off
17: off 18: off 19: off 20: off 21: off 22: off 23: off 24: off
25: off 26: off
I would be grateful fo any assistance.
Kevin
My system is a 1Ghz Athlon with 512m RAM.
=====
Kevin Ernste
Eastman School of Music
Eastman Computer Music Center
kevine_AT_ecmc.rochester.edu
http://www.esm.rochester.edu/kevine
__________________________________________________
Do You Yahoo!?
Great stuff seeking new owners in Yahoo! Auctions!
http://auctions.yahoo.com
This archive was generated by hypermail 2b28 : Fri Jan 25 2002 - 06:13:03 EET