Subject: [linux-audio-user] SIS 630 chip set sound
From: Ian Bell (ian_AT_ruffrecords.worldonline.co.uk)
Date: Wed Apr 24 2002 - 22:17:21 EEST
I am having diificulty getting sound out of my PC which is based on the SIS
630 chip set. I am using RH7.2 and sndconfig thinks I have a Trident sound
chip but when you try the test sound it just exits. Kudzu has nothing to say
about it either and a dmesg dump shows nothing about the sound system, lsmod
gives the following output:
Module Size Used by
ppp_deflate 41376 0 (autoclean)
bsd_comp 4384 0 (autoclean)
ppp_async 6736 1 (autoclean)
ppp_generic 19296 3 (autoclean) [ppp_deflate bsd_comp ppp_async]
slhc 5280 0 (autoclean) [ppp_generic]
sd_mod 11616 0 (autoclean)
ide-cd 27072 0 (autoclean)
cdrom 28512 0 (autoclean) [ide-cd]
snd-trident 19056 0 (autoclean) (unused)
snd-pcm 38880 0 (autoclean) [snd-trident]
snd-timer 10800 0 (autoclean) [snd-pcm]
snd-mpu401-uart 3600 0 (autoclean) [snd-trident]
snd-rawmidi 11840 0 (autoclean) [snd-mpu401-uart]
snd-seq-device 4240 0 (autoclean) [snd-trident snd-rawmidi]
snd-ac97-codec 27808 0 (autoclean) [snd-trident]
snd-mixer 30240 0 (autoclean) [snd-trident snd-ac97-codec]
snd 43792 0 (autoclean) [snd-trident snd-pcm snd-timer
snd-mpu401-uart snd-rawmidi snd-seq-device snd-ac97-codec snd-mixer]
soundcore 4464 0 (autoclean) [snd]
acm 5440 0 (unused)
parport_pc 14768 1 (autoclean)
lp 6416 0 (autoclean)
parport 25600 1 (autoclean) [parport_pc lp]
serial_cs 4576 0 (unused)
ds 7056 2 [serial_cs]
yenta_socket 9488 2
pcmcia_core 41600 0 [serial_cs ds yenta_socket]
autofs 11520 0 (autoclean) (unused)
appletalk 20912 0 (autoclean)
ipx 16448 0 (autoclean)
nls_iso8859-1 2832 1 (autoclean)
nls_cp437 4352 1 (autoclean)
vfat 9584 1 (autoclean)
fat 32384 0 (autoclean) [vfat]
usb-storage 39008 0
scsi_mod 95696 2 [sd_mod usb-storage]
usb-ohci 18544 0 (unused)
usbcore 51712 1 [acm usb-storage usb-ohci]
ext3 64624 2
jbd 40992 2 [ext3]
As you can see, snd, soundcore and trident are loaded.
According to KDE Control Centre the sound is:
Sound Driver 3.8.2-980706 (ALSA v0.5 .12a emulation code)
Installed drivers: Type 10 ALSA emulation
Card Config --- no soundcards--
Audio, Synth and Midi devices : not enabled in config
Any clues as to how to get this working?
TIA
Ian
This archive was generated by hypermail 2b28 : Wed Apr 24 2002 - 22:04:39 EEST