[linux-audio-user] alsa 0.9.0rc1 and opl3sa2 installation issues

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: [linux-audio-user] alsa 0.9.0rc1 and opl3sa2 installation issues
From: Mitch Pirtle (mitchy_AT_spacemonkeylabs.com)
Date: Thu May 09 2002 - 10:57:23 EEST

Hi folks,

I upgraded my kernel to 2.4.18, and cannot seem to get 0.9.0rc1 to build
on my system. I previously had 0.5.10 working with 2.4.7 kernel. I
used the original config.status to copy the ./configure steps, and
everything seems to build ok, and make install returns no errors.

I drop out of X to runlevel 3 and rmmod the OSS-free opl3sa2 and
soundcore modules, and then pop back to runlevel 5. I get the following
in /var/log/messages:

        modprobe: Can't locate module sound-service-0-0
        modprobe: Can't locate module sound-slot-0

This loops until I get sick of hearing my hard drive ticking and
re-insert the OSS-free driver. And yes, I did change snd-card-opl3sa2
to snd-opl3sa2. (Rant: We need documentation from the current
millennium! I will volunteer to help, but I need a working system FIRST
--- I don't think we need a 'I tried alsa and it destroyed my
self-esteem' document...)

Also, when I try to modprobe snd-opl3sa2 I get:

/lib/modules/2.4.18-3smp/snd-opl3sa2.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
/lib/modules/2.4.18-3smp/snd-opl3sa2.o: insmod
/lib/modules/2.4.18-3smp/snd-opl3sa2.o failed
/lib/modules/2.4.18-3smp/snd-opl3sa2.o: insmod snd-opl3sa2 failed

Anyone willing to help me figure this out? I promise to provide
detailed instructions and keep it up-to-date. I will even provide it in
ASCII, HTML and PDF... "Oh, the pain!"

New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Thu May 09 2002 - 14:06:55 EEST