Subject: RE: [linux-audio-user] [Fwd: Re: [ardour-dev] Ardour, IRQs and xruns]
From: Mark Knecht (mknecht_AT_controlnet.com)
Date: Mon Sep 16 2002 - 19:52:13 EEST
Patrick,
Possibly disable one of the USB controllers in BIOS, and then look at
interrupts to see what's there, and at the same time check which USB ports
are still working.
sometimes your motherboard manual (Asus particularly) is a good source of
information, but in many cases it has gone through so many translations it
is not... ;)
Mark
-----Original Message-----
From: linux-audio-user-admin_AT_music.columbia.edu
[mailto:linux-audio-user-admin_AT_music.columbia.edu]On Behalf Of Patrick
Shirkey
Sent: Monday, September 16, 2002 9:13 AM
To: linux-audio-user_AT_music.columbia.edu
Subject: [linux-audio-user] [Fwd: Re: [ardour-dev] Ardour, IRQs and
xruns]
People here who are not on the ardour list should find this interesting
and helpful.
Mark. I have an Nvidia agp card which uses irq9 and a usb audio card
that I can put on 11. Now I ust have to figure out how to tell which
USB port is using 11 and which is using 4.
Thanks.
-- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur http://www.boosthardware.com http://www.boosthardware.com/LAU/guide/ ========================================"Um...symbol_get and symbol_put... They're kindof like does anyone remember like get_symbol and put_symbol I think we used to have..." - Rusty Russell in his talk on the module subsystem
_______________________________________________ linux-audio-user mailing list linux-audio-user_AT_music.columbia.edu http://music.columbia.edu/mailman/listinfo/linux-audio-user
This archive was generated by hypermail 2b28 : Mon Sep 16 2002 - 20:03:53 EEST