Subject: Re: [linux-audio-user] Raid setup (kinda OT)
From: Eric Dantan Rzewnicki (rzewnickie_AT_rfa.org)
Date: Thu Mar 27 2003 - 17:54:10 EET
I haven't used raid on an audio box ... but for many of our servers we
are using mirrored raids (RAID1) for the system disks. For what it's
worth and without saying anything about whether or not this is
appropriate for your situation, attached is the cheat sheet I use to
remind myself of what I need to do when setting these up.
but the mdadm debian package mentioned in this thread might make my
notes obsolete. :)
On Wed 26/03/2003 13:18:43, Bryan Koschmann - GKT wrote:
> Hello,
>
> While I know this is specfically an audio group, I'm thinking this is
> still related, but I apologize if it is too far off topic.
>
> I was wondering if anyone here has setup an IDE raid, either via hardware
> or software. I ask because I know it usually would speed up disk access
> which is good for realtime audio work (I had to work on a scsi system with
> a layla for a customer of mine). I was looking at doing a striped raid
> with 2 80 gigs (or maybe 2 120s).
>
> I tried to setup a striping (then later a mirror) on my other machine
> running slack 8.0 but had absolutely no luck whatsoever. Neither the
> hardware on my motherboard (HPT370 on abit VP6) or just a simple software
> raid worked. I will probably be using the same board for audio recording
> unless someone has a better suggestion (looking at asus).
>
> So, if anyone can give me any recommendations or hints/tips I would be
> quite happy. :)
>
> Thanks in advance,
>
> Bryan
>
>
>
>
This archive was generated by hypermail 2b28 : Thu Mar 27 2003 - 18:01:48 EET