Subject: Re: [linux-audio-user] YMFPCI hardware midi/snd-mp401-uart Problem
From: BartonBosch_AT_aol.com
Date: Tue Sep 02 2003 - 08:05:51 EEST
>The raw device is for externa synth, I believe.
>As far as a sequencer goes, it's far better to use a >softsynth than the legacy card synth. With a softsynth, you >will have far better sounds, see for example timidity and the >eawpats sound with your distro.
>When timidity is installed and launched (timidity -iA) you >will find it in this MusE box.
I wanted to use the wavetable synth, even if it was of lower sound quality, as a tool to listen to work in progress so as to reduce the load on the processor. I have been having some problems with crackling noises which I assume are caused by MusE and or the softsynth overloading the processor when playing back a multitrack midi file.
Today I did some experimenting with TiMidity as the softsynth for MusE -- I got it configured with timidity -iA in one terminal and muse -R in another. Then in the midiport configuration it popped up with timidity port 0 for the first midi port. Unfortunately this produced no sounds on testing. I opened the track info number and tried to select a preset, but all that it had was "???" -- no patches to select from.
Is there another switch that needs to be thrown to load sounds into TiMidity? Something else?
I am running the Planet CCRMA acpi kernel, RH 8.0, with TiMidity++ 2.11.3-4.1, TiMidity midia instruments 2.11.3-4.1, and eawpats 12-1 installed.
Thanks,
Barton
This archive was generated by hypermail 2b28 : Tue Sep 02 2003 - 08:10:22 EEST