[linux-audio-user] Re: HDSP firmware

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: [linux-audio-user] Re: HDSP firmware
From: BrbrOfSvl_AT_aol.com
Date: Mon Sep 22 2003 - 01:59:20 EEST


In a message dated 9/21/2003 7:02:01 PM Eastern Daylight Time, linux-audio-user-request_AT_music.columbia.edu writes:

>
> Could you please send the output of the dmesg command ?

I'll send the whole thing just to be complete, but I think the pertinent hdsp stuff is toward the bottom:

# dmesg
 

colour VGA+ 80x25
Calibrating delay loop... 2170.88 BogoMIPS
Memory: 1033072k/1048512k available (1495k kernel code, 15052k reserved, 524k data, 196k init, 131008k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1102.0294 MHz.
..... host bus clock speed is 200.0417 MHz.
cpu: 0, clocks: 200417, slice: 100208
CPU0<T0:200416,T1:100208,D:0,S:100208,C:200417>
mtrr: v1.40 (20010327) Richard Gooch (rgooch_AT_atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030522
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/01e0] at 00:00.0
spurious 8259A interrupt: IRQ7.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.4.0 initialized
        -0420: *** Error: Could not allocate an object descriptor
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci00:09.0
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
HPT372A: IDE controller at PCI slot 01:0b.0
HPT372A: chipset revision 2
HPT372A: not 100% native mode: will probe irqs later
hpt: HPT372N detected, using 372N timing.
FREQ: 124 PLL: 45
hpt: no known IDE timings, disabling DMA.
hpt: no known IDE timings, disabling DMA.
hda: ST3120023AS, ATA DISK drive
blk: queue c036d200, I/O limit 4095Mb (mask 0xffffffff)
hdc: ST3120024A, ATA DISK drive
hdd: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
blk: queue c036d65c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=232581/16/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 < hda5 hda6 >
 hdc: [PTBL] [14593/255/63] hdc1 hdc2 < hdc5 hdc6 hdc7 > hdc3 hdc4
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 196k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: No IRQ known for interrupt pin A of device 00:02.0. Please try using pci=biosirq.
usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings!
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xf884b000, IRQ 5
usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.2 to 64
ehci-hcd 00:02.2: PCI device 10de:0068 (nVidia Corporation)
ehci-hcd 00:02.2: irq 10, pci mem f8854000
usb.c: new USB bus registered, assigned bus number 2
PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:02.2 PCI cache line size corrected to 64.
ehci-hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech_AT_suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,4), internal journal
Adding Swap: 2096440k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: PIONEER Model: DVD-RW DVR-106D Rev: 1.05
  Type: CD-ROM ANSI SCSI revision: 02
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, Hewlett-Packard HP LaserJet 6MP
ohci1394: $Rev: 896 $ Ben Collins <bcollins_AT_debian.org>
PCI: Setting latency timer of device 00:0d.0 to 64
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e4084000-e40847ff] Max Packet=[2048]
ohci1394_0: SelfID received outside of bus reset sequence
ieee1394: Host added: Node[00:1023] GUID[0001290000000000] [Linux OHCI-1394]
ieee1394: Host removed: Node[00:1023] GUID[0001290000000000] [Linux OHCI-1394]Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xf89cc000, 00:01:29:82:13:3f, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.PCI: Setting latency timer of device 00:06.0 to 64
intel8x0: clocking to 48000
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, Hewlett-Packard HP LaserJet 6MP
lp0: using parport0 (polling).
lp0: console ready
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
PCI: Setting latency timer of device 00:06.0 to 64
intel8x0: clocking to 47414

Matt Barber


New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Mon Sep 22 2003 - 02:07:35 EEST