Re: [linux-audio-user] mounting network drives for dummies?

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: Re: [linux-audio-user] mounting network drives for dummies?
From: Jan Depner (eviltwin69_AT_cableone.net)
Date: Thu Oct 30 2003 - 11:21:41 EET


Mark,

        On the machine that you want to be the source (as root):

edit /etc/exports and add the line:

/source_partition destination_system(rw)

where source_partition is the file system that you wish to share and
destination system is the name of the destination system (as shown in
/etc/hosts) or its IP address (192.168.0.whatever). (rw) gives read and
write access to the destination system. Then enter the following:

chkconfig portmap on
chkconfig nfs on
/etc/rc.d/init.d/portmap start
/etc/rc.d/init.d/nfs start

        On the destination system (as root):

chkconfig portmap on
chkconfig nfs on
chkconfig amd on
/etc/rc.d/init.d/portmap start
/etc/rc.d/init.d/nfs start
/etc/rc.d/init.d/amd start

At this point, if you do:

cd /net/source_system
ls

you should see the source_partition. I'm not sure if chkconfig is
available on all systems. It is on RH. On a RH system you can also use
"sevice nfs start" instead of "/etc/rc.d/init.d/nfs start". The
chkconfig lines make these services start on boot so if you only want to
do it once don't do that on either system. amd is the automounter
daemon. All of this assumes that you have your network cards configured
so that each machine can see the other. It's also handy to have the
name and IP address of each machine in the /etc/hosts file.

Jan

On Wed, 2003-10-29 at 21:46, Mark Knecht wrote:
> Hi,
> I've got two Linux boxes, one Gentoo and the other PlanetCCRMA. I
> need to move about 10GB of data from one to the other. How can I do
> this? I guess that over Ethernet maybe Samba or NFS might work? I don't
> know anything about making either of these technologies work, and
> obviously I don't want to start building kernels or anything like that
> to get there.
>
> Has anyone got a tutorial on how to do this easily. I really don't
> want to become an IT guy to make this work.
>
> If it's too difficult, then I could dig up and add a 1394 adapter to
> one box and dump it to the other that way. The second machine has 1394
> already. I just didn't want to open the box up and mess with cards.
>
> Thanks very super much in advance,
> Mark
>


New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Thu Oct 30 2003 - 11:44:32 EET