Re: [linux-audio-user] APIC is bad?

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: Re: [linux-audio-user] APIC is bad?
From: Clemens Ladisch (clemens_AT_ladisch.de)
Date: Fri Jul 23 2004 - 11:19:45 EEST

Florin Andrei wrote:
> There's a distasteful overlap between EMU10K1 and eth0 but i'm not using
> the network too much while doing audio work:
>
> 16: 2503314 IO-APIC-level ohci1394, nvidia
> 17: 88 IO-APIC-level ide2, ide3
> 19: 3098 IO-APIC-level eth0, EMU10K1
> 20: 0 IO-APIC-level ohci_hcd
> 21: 0 IO-APIC-level ohci_hcd
> 23: 0 IO-APIC-level ehci_hcd

You could try to move the SB card to a PCI slot using one of the free
interrupts (18, 22). The slot <-> interrupt assignment should be
listed in your motherboard manual. (In the usual routing scheme, the
next higher-numbered slot should use interrupt 18.)

HTH
Clemens

New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Fri Jul 23 2004 - 11:22:58 EEST