Subject: Re: [linux-audio-user] Midisport 8x8 - firmware not loading SOLVED
From: Brad Fuller (brad_AT_sonaural.com)
Date: Tue Nov 16 2004 - 02:57:38 EET
Thanks for everyone's help.
It was, indeed, an electrical issue. I took a powered USB hub and put it
between the PC and the 8x8 and Midiman instantly showed up on lsusb
Again, thanks for all your help!
brad
Brad Fuller wrote:
> Marije Baalman wrote:
>
>> Hi,
>>
>> FWIW:
>> I have a similar problem with the 2x2:
>> when I connect the device, it shortly shows up in lsusb, then the leds
>> on the device all blink once, and then it does not show up anymore in
>> lsusb.
>> Other usb devices work fine.
>> The MidiSport 2x2 works fine after a reboot, while the MidiSport 2x2
>> is still plugged in; it then immediately gives the nice burning
>> USB-led sign that it is allright, even before I start booting Linux.
>>
>>
> Thanks for the input. I tried different configurations (rebooting with
> it plugged in, out... etc.) Unfortunately, my 8x8 does not behave like
> your 2x2. At this point, I'm stumped. I'm wondering if it's a
> hardware issues -- perhaps the voltage is just under a certain threshold.
>
> brad
>
>
This archive was generated by hypermail 2b28 : Tue Nov 16 2004 - 07:01:53 EET