Subject: Re: [linux-audio-user] How-to for Recording on Ardour : Ans Query
From: ish_AT_sarai.net
Date: Thu Dec 16 2004 - 08:57:28 EET
thanks joq for going through the how to....
And as you had said that Audio 3 will be a mono track is not
true..>because>> Audio 3(out 1/out 2) is a stereo track..... i m recording
guitar on Audio1 (track1) and Audio 2, so they both are mono... and i m
then putting the output of the master track (after these two tracks are
recorded) into jamin>>> ie master is stereo which will go into jamin
(left/right) stereo... then im taking the balanced/mastered out(stereo) of
jamin and connectin it to 'Audio 3' , so , hence Audio 3 becomes
stereo.... and so we are exporting a stereo audio file...
i have understood your point completely .. are you saying that if we have
2 mono channels we put one on the left and the other on the right while we
export ..?
...#ish
>> On Tue, 2004-12-14 at 11:33, ish_AT_sarai.net wrote:
>> > Hi every one ... i ve witten a kind of a rough How-to(Draft) for
>> initial
>> > recording using Ardour... and using JAmin along with it via
>> JACK(jackd).
>> > This was primarily go give a basic how to of intial acoustic
>> recording.
>> > And how a mastering software, which in this case is JAmin can be used
>> to
>> > tweak the recording to produce a well spaced/MAstered
>> > recording...(Basically to achive the stuff in youe head) . Well this
>> is
>> > just a start... and any input from your side will be helpful... so
>> please
>> > check out the following site ...
>> >
>> > http://users.sarai.net/~ish/contents.html
>
> Nice, helpful writeup. I did notice a significant error you might
> want to correct, however.
>
> On this page...
>
> http://users.sarai.net/~ish/Exporting_audio.html
>
> Your example checks *both* Left and Right stereo channels when
> exporting Audio 3:out-1 and Audio 3:out-2 to a WAV file. I believe
> this gives "mono" output in a stereo file (in the sense that both
> channels will be the same). I recommend checking Left for Audio
> 3:out-1 and Right for Audio 3:out-2. That will render the stereo
> outputs from JAMin correctly.
> --
> joq
>
This archive was generated by hypermail 2b28 : Thu Dec 16 2004 - 09:13:06 EET