On Wed, Feb 02, 2005 at 04:12:39PM +1000, vector wrote:
> Hi
> newbie
> Just grasping the ins and outs of jack
> basic sound blaster card
> tone present on line in
> qjackctl shows capture_1, .. _2.
> I can remove the route of capture_1 etc to things like ardour by
> disconnecting it in qjackctl as expected.
> however I cant stop the line input from being "mirrored" on the cards
> output.
> gnomes volume control ..line slider allows me to adjust the volume.
> (like a pre fader) but no matter what i disconnect in jack the tone on
> line input also comes out of the cards output.
I'm not sure how the architecture of all this is done (I'm still
learning) but I found that I have to mute the line to make it silent. I
did that in alsamixer. Just go to the "line" and press "m".
regards,
- Bengan --------------------------------------------------------------
- KTHNOC/SUNET/NORDUnet | http://www.sunet.se/~bengan | +46 8 7906586 -
Received on Wed Feb 2 12:15:04 2005
This archive was generated by hypermail 2.1.8 : Wed Feb 02 2005 - 12:15:05 EET