On Sat, 2005-03-26 at 13:32 +0000, Steve Fosdick wrote:
> On 24/03/05 19:03:50, Lee Revell wrote:
> > On Thu, 2005-03-24 at 13:49 -0500, Lee Revell wrote:
> > > Is the USB irq shared with anything?
> >
> > Never mind, I see that it is shared, and with a pretty "heavy" device
> > (the network card).
> >
> > Is this the case for everyone who is having the problem?
> >
> > Does disconnecting the network cable help?
>
> I had previously tried disconnecting the network cable but this didn't
> seem to make any difference. I also tried the apci_irq_balance option
> but that didn't solve it either.
>
> I have finally got jackd to run without complain by disabling CPU
> frequency scaling, i.e. having the CPU run at 1.2Ghz all the time rather
> than switch to 600Mhz when it doesn't appear that there is anything
> going on.
>
> I wonder if this means the code path between the USB interrupt and jackd
> being woken up is very long so as to require the full 1.2Ghz or whether
> it is just a case of the frequency switching upsetting some time
> calculations.
Oh, well, of course. JACK does not work with CPU frequency scaling.
You need to run it at full speed. This is something of a FAQ.
Lee
Received on Sun Mar 27 00:15:06 2005
This archive was generated by hypermail 2.1.8 : Sun Mar 27 2005 - 00:15:11 EET