peter plessas wrote :
> I have now tested alsa-drivers-1.0.9rc1 with hotplug support in the
> kernel, but without success. When i boot into OSX, load the firmware
> there, and do a warm-reboot into debian, the card works, even
> reinserting and putting the computer into sleep mode doesn't stop the
> card from working.
> But after a coldboot into debian, the card remains uninitialized, giving
> the same error as described below.
>
(...)
> >>
> >>peter:~# hdsploader
> >>hdsploader - firmware loader for RME Hammerfall DSP cards
> >>Looking for HDSP + Multiface or Digiface cards :
> >>Card 0 : PowerMac Screamer Rev 0
> >>Card 1 : RME Hammerfall DSP at 0xf3000000, irq 58
> >>Upload firmware for card hw:1
> >>Hwdep ioctl error on card hw:1 : Input/output error.
> >>
> >>I am using debian testing, running a 2.6.8 kernel with manually compiled
> >> 1.0.8 alsa drivers on a G3 powerpc laptop.
> >>
> >>cardbus version is 11 (rev 0b)
> >>
> >>the card is loadable out of osx.
> >>
Hi Peter,
I would need a little more information.
Could you please post the output of 'dmesg | grep Hammerfall', and
verify to be sure the alsa version your kernel is running
(cat /proc/asound/version).
Are your drivers compiled in kernel or as modules ?
Thomas
Received on Wed Apr 6 16:15:06 2005
This archive was generated by hypermail 2.1.8 : Wed Apr 06 2005 - 16:15:06 EEST