On Mon, 2005-04-18 at 00:10 -0500, Jack O'Quin wrote:
> Alan Taylor <alan-linuxaudiouser@email-addr-hidden> writes:
>
> > The error seems to point to the channel count, but whether I specify 2
> > or the proper number, which is 4, it makes no difference. Permissions
> > and ownership:group in /dev/sound and /dev/snd appear to be fine.
>
> Try leaving off -i and -o completely. Internally, the chip has 10
> inputs and 12 outputs, although the card only has 4 and 4. Just allow
> JACK to use them all. It shouldn't hurt anything.
>
That did it! I set both values to 0 in qjackctl and it just leaves them
off the command line. That seems odd that I'd have access to the device
for the I/O of data, but not access to settings like number of ports.
Any insight as to why that is? Either way, thank you very much for your
help!
Alan
Received on Tue Apr 19 00:15:09 2005
This archive was generated by hypermail 2.1.8 : Tue Apr 19 2005 - 00:15:10 EEST