Re: [linux-audio-user] 2x RME Multifaces, ALSA, JACK & Ardour -> XRUNS?

From: Frank smith <fsmith@email-addr-hidden>
Date: Fri Jul 08 2005 - 22:25:19 EEST

Hi Edwin
Give Fervent software.com a look:

http://www.ferventsoftware.com

I got a disk from them and you can run from the CD to check stuff out.
I then installed it to the HD and it's been running ever since.
I recorded the song below using it ( Ardour - jammin)

At least you may get some help from Chris
seems quick on the mails as support.

Cheers
Bob

Edwin Peer wrote:

>On Friday 08 July 2005 16:20, Frank smith wrote:
>
>
>
>>I use 16 tracks on 2 adats into the PC running Fervent Software.
>>
>>
>
>What is Fervent?
>
>
>
>>You may be able to borrow a Fervent CD and try this and see if you still
>>get the xruns.
>>
>>
>
>That sounds like a great idea, I've even been tempted to install Windows on
>the box just to see if the Windows software can handle the hardware
>configuration. But that's not an ideal solution - since I would have to trash
>the existing data on the machine to do it.
>
>
>
>>I was under the impression that the RME multi's were fully supported in
>>Linux.
>>
>>
>
>They are. I think. Using only one of the two cards works fine.
>
>
>
>>Have you insured you have the RME drivers installed and loaded?
>>
>>
>
>I think so. HDSPConf see's both of them. I can also capture from both. The
>only problem is the XRUNs.
>
>
>
>>Are you running 64bit?
>>
>>
>
>Yes, is that a problem?
>
>
>
>>Your systems seems more than adequate for recording to Ardour.
>>
>>
>
>I thought so too, but I'm really struggling with this. :(
>
>I've been doing some further investigating...
>
>I gather there are two places where XRUNs happen:
>
>1) ALSA <--> JACK
>2) JACK <--> JACK client
>
>>From what I've been seeing when I play with the IRQ, JACK and qjackctl
>priorites with chrt and the realtime-preempt kernel, I can cause the first
>type by making the IRQ priority lower than JACK. jackd -v logs this as an
>alsa XRUN. The second type is the problem I'm experiencing. Nothing shows in
>the jackd -v output, but the client (qjackctl) sees XRUNs - usually a hundred
>or so of them every few seconds.
>
>:espeer:
>
>
>

-- 
F R Smith
Technical Admin
http://www.Rokpacardiff.com
Received on Sat Jul 9 00:15:08 2005

This archive was generated by hypermail 2.1.8 : Sat Jul 09 2005 - 00:15:09 EEST