On Thu, 2005-09-29 at 13:57 -0700, Mark Knecht wrote:
> On 9/29/05, Michael T D Nelson <m_nels@email-addr-hidden> wrote:
> > Paul Davis wrote:
> > > On Wed, 2005-09-28 at 21:26 +0100, Michael T D Nelson wrote:
> > >>I bought a cheap second-hand RME Hammerfall 9636 recently, in the
> > >>knowledge that it was untested.
> > >
> > > first step, pull the card, look for a small chip that will say either
> > > "W36" or "M36". find out which one it is.
> > >
> > > i (yes, even i!) had problems with this when accidentally using a 9636
> > > with the little-endian EPROM ("W36") on a big-endian machine (a mac).
> >
> > Hello again Paul.
> >
> > I think that you're right.
> >
> > The EPROM is marked 'M36'. I am using it in a Pentium 3 machine. Later
> > it will probably be used in an Athlon XP box. I take it that this is
> > probably causing my problem?
> >
> > Am I correct in assuming that I need to obtain a 'W36' chip and swap the
> > two?
> >
> > Does anyone know if the revision number of the chip is significant? I
> > was told that the original card was revision 1.5.
1.5 is just fine. You don't need newer or older to use the card
perfectly well.
--p
Received on Fri Sep 30 04:15:13 2005
This archive was generated by hypermail 2.1.8 : Fri Sep 30 2005 - 04:15:14 EEST