On Thu, 13 Oct 2005 19:58:01 +0200
Lazzaro Nicoḷ Ciccolella <ciccolix@email-addr-hidden> wrote:
> I am not able to configure the bca2000 under linux.
>
> Although I loaded the module "snd-usb-audio" the only card that comes
> seen is the intel motherboard integrated card.
The BCA isn't listed with lsusb, so it hasn't been seen by the system.
Have you power-cycled it after Linux has booted? I find I have to do
that pretty frequently, usually just after I start jack.
I don't know what application you want to use the BCA with, but the
Wiki entry at http://ardour.org/manual/using_a_bcf2000 has some helpful
hints on connecting a BCF/BCA even if you're not using Ardour.
-- ====================================================================== Joe Hartley - UNIX/network Consultant - jh@email-addr-hidden Without deviation from the norm, "progress" is not possible. - FZappaReceived on Fri Oct 14 00:15:06 2005
This archive was generated by hypermail 2.1.8 : Fri Oct 14 2005 - 00:15:06 EEST