On Mon, 2005-10-31 at 12:08 +0100, Marcus Fischer wrote:
> Geoff,
>
> does that mean that it is impossible to get it running with setup
> options only? - If I understood correct, you face the same trouble, not?
>
Please test the various "model" options listed here (modprobe
snd-hda-intel model="asus" for example) and report which (if any) work
for you.
Yes it's annoying, the ALSA developers are working on a better method.
Module snd-hda-intel
--------------------
Module for Intel HD Audio (ICH6, ICH6M, ICH7), ATI SB450,
VIA VT8251/VT8237A
model - force the model name
position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 =
FIFO size)
This module supports one card and autoprobe.
Each codec may have a model table for different configurations.
If your machine isn't listed there, the default (usually minimal)
configuration is set up. You can pass "model=<name>" option to
specify a certain model in such a case. There are different
models depending on the codec chip.
Model name Description
---------- -----------
ALC880
3stack 3-jack in back and a headphone out
3stack-digout 3-jack in back, a HP out and a SPDIF out
5stack 5-jack in back, 2-jack in front
5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
6stack 6-jack in back, 2-jack in front
6stack-digout 6-jack with a SPDIF out
w810 3-jack
z71v 3-jack (HP shared SPDIF)
asus 3-jack
uniwill 3-jack
F1734 2-jack
test for testing/debugging purpose, almost all
controls can be
adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
Received on Mon Oct 31 20:15:06 2005
This archive was generated by hypermail 2.1.8 : Mon Oct 31 2005 - 20:15:07 EET