Re: [linux-audio-user] Real Time Sound Levels readings and comparing

From: studio64 <fsmith@email-addr-hidden>
Date: Wed Jan 18 2006 - 23:34:46 EET

Folderol wrote:

>On Wed, 18 Jan 2006 19:44:42 +0000
>studio64 <fsmith@email-addr-hidden> wrote:
>
>
>
>>HI All
>>Is there a Linux way of recording sound from a club or pub/bar using a
>>real time analyzer
>>and then getting an average DB level reading?
>>
>>I would then need to take another reading later and compare the two.
>>
>>In the UK there is a lot of new legislation re sound levels from bars
>>and clubs
>>and I would like to offer a service to show them the levels they are
>>putting out.
>>
>>I would need some way of printing the levels out in a document.
>>
>>This will show that if the clubs has a certain sound level on the dance
>>floor it can't be above a certain level at the street.
>>
>>ie:
>>75db in the club may read only 65db in the street, meaning they are not
>>causing a noise problem.
>>
>>I'm using 64studio/Ardour/Jamin at the moment on debian, but have also
>>use the planet on Redhat/Fedora.
>>
>>I'm sure its all in here somewhere I just need to know what to learn.
>>
>>Cheers
>>Bob
>>
>>
>
>Getting reliable field sound level measurements is a notoriously
>difficult task. I do not envy you.
>
>Making assumptions about transmission attenuation through walls etc. is
>even more fraught.
>
>One of the most unbelievable variables is the number of people in the
>space, the clothes they are wearing and where they are standing! Not
>only does this affect absorbtion but also standing wave
>characteristics etc.
>
>I wish you luck!
>
>
>

HI
Yes your right on this, I'm thinking that the DB level will be louder
with the club/Bar empty (no people to get in the way)
and taking readings from any vents, open doors to show the increase in
level.
This is how the councils seem to be doing it here in the UK.

Cheers
Bob
Received on Thu Jan 19 00:15:11 2006

This archive was generated by hypermail 2.1.8 : Thu Jan 19 2006 - 00:15:11 EET