[linux-audio-user] Re: Bristol Audio synthesiser emulation

From: Loki Davison <loki.davison@email-addr-hidden>
Date: Mon Feb 27 2006 - 13:36:43 EET

On 2/27/06, Nick Copeland <nickycopeland@email-addr-hidden> wrote:
> Hi Loki,
>
> The engine has not been able to open the listerner socket so the GUI has
> also failed to connect. You may already have this socket active. You could
> select an alternative port number with the -port option. You can use
> 'netstat -an | grep 5028' to see if it is in use. Its not a common port
> number, but it is not reserved so could easily be used.
>
> Will look into the CFLAGS for the next release.
>
> Regards,
>
> Nick.
>

# netstat -an | grep 5020
#

So nothing using that port. I still get connection probs. Does it work
on 64 bit?

./bin/startBristol -b3 -port 5020

spawning midi thread
Could not reschedule thread to 2
parent going into idle loop
        flags (2) 0a000000
midi sequencer
Returning socket 3
Opened listening control socket: 5020
Client ID = 128
Queue ID = 0
Device name did not parse, defaults 128.0
Found 1 descriptor
connected to :0 (5e5430)
display is 1280 by 1024 pixels
Window is w 1280, h 1024, d 24, 0 0 0
Using DirectColor display
masks are ff0000 ff0000 ff0000
Initialise the hammondB3 link to bristol: 5ea200
starting upper manual connection
hostname is localhost, bristol
port is 5020
connfailed
opening link to engine: 5020
hostname is localhost, bristol
port is 5020
connfailed
cleanupBristol(-4)
Received on Mon Feb 27 16:15:09 2006

This archive was generated by hypermail 2.1.8 : Mon Feb 27 2006 - 16:15:09 EET