Re: [linux-audio-user] Recording ADAT inputs on RME hammerfall 9636/52

From: Mark Knecht <markknecht@email-addr-hidden>
Date: Wed Jun 21 2006 - 20:55:30 EEST

On 6/21/06, Mark Knecht <markknecht@email-addr-hidden> wrote:
> On 6/20/06, Stephen Cameron <smcameron@email-addr-hidden> wrote:
> <SNIP>
> > > I suspect, for no good reason, that the mixer and the Hammerfall
> > > wouldn't be happy if the Hammerfall is really running at 22K.
> >
> > Ok. I don't know what to make of that.
> Nor I. We need to figure this out. If the card is truly not running at
> 44/48K then I suspect your mixer will give you no sound, as it seems
> to be.
> <SNIP>

> Maybe you can do something similar and see what you discover?
> Cheers,
> Mark
BTW - You can always take the ADAT cable and connected it from the
output back to an input, send audio out and then see if you can record
audio coming back in. It's a simple test to make sure the
Alsa/Hammerfall set up is actually working. If that fails the problem
is in your Linux setup, or the ADAT cables. If it works then it's
either in the mixer or an interface problem where the mixer and the
Hammerfall are not somehow compatible. (Or how you've configured your
mixer I suppose....
Received on Thu Jun 22 00:15:07 2006

This archive was generated by hypermail 2.1.8 : Thu Jun 22 2006 - 00:15:07 EEST