Mark Krecht wrote:
[snip]
> BTW - You can always take the ADAT cable and connected it from the
> output back to an input, send audio out and then see if you can record
> audio coming back in. It's a simple test to make sure the
> Alsa/Hammerfall set up is actually working. If that fails the problem
> is in your Linux setup, or the ADAT cables. If it works then it's
> either in the mixer or an interface problem where the mixer and the
> Hammerfall are not somehow compatible. (Or how you've configured your
> mixer I suppose....
Oh, now that's a good idea. I can probably do the same
on the AW as well. Thanks.
I found jackbitscope here, btw:
http://www.ecs.soton.ac.uk/~njl98r/code/ladspa/bitscope/
Thanks for that...
I'll post what I find out tonight.
-- steve
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Received on Thu Jun 22 00:15:07 2006
This archive was generated by hypermail 2.1.8 : Thu Jun 22 2006 - 00:15:08 EEST