Re: [linux-audio-user] Recording ADAT inputs on RME hammerfall 9636/52

From: Stephen Cameron <smcameron@email-addr-hidden>
Date: Thu Jun 22 2006 - 19:15:58 EEST

--- Stephen Cameron <smcameron@email-addr-hidden> wrote:
> Mark Krecht wrote:
> [snip]
> > BTW - You can always take the ADAT cable and connected it from the
> > output back to an input, send audio out and then see if you can record
> > audio coming back in. It's a simple test to make sure the
> > Alsa/Hammerfall set up is actually working. If that fails the problem
> > is in your Linux setup, or the ADAT cables. If it works then it's
> > either in the mixer or an interface problem where the mixer and the
> > Hammerfall are not somehow compatible. (Or how you've configured your
> > mixer I suppose....
> Oh, now that's a good idea. I can probably do the same
> on the AW as well. Thanks.
> I found jackbitscope here, btw:
> Thanks for that...
> I'll post what I find out tonight.

Well, something came up and I wasn't able to try out as much
as I wanted to last night, but I did try the loopback test
with the AW4416 talking to itself over 50 foot ADAT cable,
and that worked. At least I know it's possible to use the
cables under some circumstance.

-- steve

Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
Received on Fri Jun 23 00:15:02 2006

This archive was generated by hypermail 2.1.8 : Fri Jun 23 2006 - 00:15:03 EEST