[linux-audio-user] interrupts

Hi

I run xubuntu on a IBM T41 laptop with Pentium M 1.6 and 1G ram.

Reading this (http://tapas.affenbande.org/?page_id=40) suggests that I
should have change the priority of my sound card. Here's my
/proc/interrupts:

atte@email-addr-hidden:~$ cat /proc/interrupts
            CPU0
   0: 2421490 XT-PIC timer
   1: 11005 XT-PIC i8042
   2: 0 XT-PIC cascade
   7: 0 XT-PIC parport0
   8: 5 XT-PIC rtc
   9: 1587965 XT-PIC acpi
  11: 3008807 XT-PIC uhci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, ehci_hcd:usb4, yenta, yenta, radeon@email-addr-hidden:0000:01:00.0,
Intel 82801DB-ICH4, ath0, eth0
  12: 68364 XT-PIC i8042
  14: 95065 XT-PIC ide0
  15: 167883 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0

And heres lspci:
atte@email-addr-hidden:~$ lspci
0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O
Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP
Controller (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC
Interface Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility M7 LW [Radeon Mobility 7500]
0000:02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus
Controller (rev 01)
0000:02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus
Controller (rev 01)
0000:02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit
Ethernet Controller (Mobile) (rev 03)
0000:02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212
802.11abg NIC (rev 01)

So I have two soundcards, the onboard (82801DBDBL/DBM, from looking at
lspci) and an Edirol USB UA1A. It seems that alot of stuff is sharing
IRQ 11 (soundcard, usb, graphics card, ethernet, wlan and pcmcia). So my
questions is:

Would the way to go be to reassign usb and soundcard to their own
(shared?) IRQ?. How is this done and which IRQ should I go for?

-- 
peace, love & harmony
Atte