On Fri, Nov 03, 2006 at 09:23:10AM +1100, Stuart Allie wrote:
> I've just started playing with jack_convolve and I'm having a few
> problems. If I run the program with the default gain factor (1.0) and a
> room-type impulse, the output is horribly clipped - it clips on even a
> small input signal. In order to get a clean output, I have to reduce the
> gain to something like 0.01. Is that normal/expected behaviour? It seems
> odd that the default gain would be 1.0 if a useful value is around
> 0.01...
It depends on the energy in the IR. If it is a single strong pulse
followed by much lower samples, then a gain of 1 should work. If the
IR contains a lot of high amplitude samples, you will have to reduce
the gain.
You may want to have a look at JACE :
http://users.skynet.be/solaris/linuxaudio
-- FA Lascia la spina, cogli la rosa.Received on Fri Nov 3 04:15:02 2006
This archive was generated by hypermail 2.1.8 : Fri Nov 03 2006 - 04:15:02 EET