Carotinho wrote:
> Hi all!
> I've just bough a Delta 44 but I can't run it.
> I've installed it properly, and the modules get loaded. But I'm scratching my
> head as I cannot get Jack to work with it.
> The message is
>
> loading driver ..
> apparent rate = 48000
> creating alsa driver ... hw:2,0|hw:2,0|128|2|48000|4|4|nomon|swmeter|-|32bit
> control device hw:2
> configuring for 48000Hz, period = 128 frames, buffer = 2 periods
> ALSA: final selected sample format for capture: 32bit little-endian
> ALSA: cannot set channel count to 4 for capture
> ALSA: cannot configure capture channel
> cannot load driver module alsa
>
> and I get errors with every channel count number, sample rates, etc.
even with 0 (zero) channel count? :)
Bye.
-- rncbc aka Rui Nuno Capela rncbc@email-addr-hiddenReceived on Tue Dec 12 00:15:13 2006
This archive was generated by hypermail 2.1.8 : Tue Dec 12 2006 - 00:15:13 EET