Re: [LAU] rumble, motor-like sound. What frequency to set notch filter?

On Mon, Apr 16, 2007 at 08:49:19AM -0500, millward wrote:
> I'm trying ot clean up a WAV file that has a low sounding rumble, motor-like
> sound, sort of up and down. It's lower than the bass line. I'm finding this
> hard to describe in words.

Can you post a small sample somewhere?

> I'm using the Gnome Wave Cleaner and its got
> a notch filter but I don't know what frequency to set it for. I do know people
> hear from about 20 Hz to 20,000 Hz, on a good day, so would maybe 50 Hz
> to 100 Hz would be a good start?

IF you're lucky, it might be that the rumble really is completely
lower than the bassline. In that case, I'd try a very steep highpass
filter first. Set it to just below the lowest fundamental in the
bassline and see if that helps.

If the bassline is from a bass guitar, low E fundamental is about 41
Hz and low B fundamental on a 5-string is about 31 Hz. (Handy chart
here: http://en.wikipedia.org/wiki/Piano_key_frequencies).

Typically most of the energy from a bass guitar is in the first few
overtones, so you might also be able to apply some gradual rolloff of
frequencies below about 80 Hz.

-- 
Paul Winkler
http://www.slinkp.com
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user