Hiho,
On Friday 01 June 2007 07:22:09 nescivi wrote:
> On Thursday 31 May 2007 21:38:23 Marc-Olivier Barre wrote:
> > > The system sees the card at startup and loads the firmware properly,
> > > and I can use the card without any problems.
> > >
> > > The only problems that occur are when I insert the PCMCIA card later
> > > with the box attached. Then the system hangs. I.e. I need to have the
> > > card inside and the box attached at startup, it seems.
> >
> > Very strange...do you get the same results with pcmciautils ?
>
> thanks for the hint.
> that enables me now to insert the card while the box is attached and get
> the firmware loaded.
> I actually had already pcmciautils installed, but I removed pcmcia-cs, and
> installed sysfsutils.
> (all debian packages).
>
> > On my side, it hangs when I remove the card (without prior kernel
> > module removal)
>
> and I can even remove the card, and reinsert it now.
>
> thanks!
>
> Now I just need to check the suspend issue...
suspend and hibernate also work allright both ways now.
sincerely,
Marije
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
Received on Fri Jun 1 20:15:02 2007
This archive was generated by hypermail 2.1.8 : Fri Jun 01 2007 - 20:15:02 EEST