Hey, now I **really** tune my impulse responses! ;-)
Cheers,
Mark
On 6/29/07, Jan Depner <eviltwin69@email-addr-hidden> wrote:
>
> * Added per band delay to low and mid bands.
>
> * Changed initialization value from 0.1 to 0.0001 in rms.c
> to avoid jump on startup.
>
> The delay works is useful for compensating for the different arrival
> times at speaker systems of low and mid frequencies versus high
> frequencies (or driver placement). The first time I encountered this
> was in using Rane crossovers but it is also in other crossovers and is
> hardwired into the BBE Sonic Maximizer. For the purists in the user
> pool - it only took up two tiny little checkboxes and if you don't want
> to use them just don't check them ;-) There's very little processing
> overhead involved since I avoided the use of if statements in the
> processing loop.
>
>
> Steve,
>
> As this is my first incursion into the actual processing code, could
> you please take a look at how I implemented this and make sure I didn't
> miss something? It's basically the same code that you suggested except
> that I needed two counters (port 0 and port 1).
>
>
> Cheers,
> Jan
>
>
> --
> Jan 'Evil Twin' Depner
> http://myweb.cableone.net/eviltwin69
>
> "Life should NOT be a journey to the grave with the intention of
> arriving safely in an attractive and well preserved body, but rather to
> skid in sideways, chardonnay in one hand, chocolate in the other, body
> thoroughly used up, totally worn out, and screaming 'WOO HOO, what a ride'"
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
Received on Sat Jun 30 00:15:02 2007
This archive was generated by hypermail 2.1.8 : Sat Jun 30 2007 - 00:15:02 EEST