Re: [LAU] BCF2000

Dne pondělí 29 říjen 2007 15:03 Kevin Cosgrove napsal(a):
> Hi,
>
> A bit over a month ago my BCF2000 was working just fine. I
> didn't have to do much special with it, just plug it in via USB,
> turn it on, and put it into "Logic Control" mode. Then it would
> show up in /proc/asound as card3. But, now it doesn't show up in
> /proc/asound. No messages appear in /var/log/messages. Where
> should I start to troubleshoot this?

Check the usb cable. Or you can reset it to the initial state, which AFAIK has
usb connection turned on by default.
/var/log/messages or dmesg should show something like
usb 4-1: new low speed USB device using uhci_hcd and address 2
at least

-- 
Jozef Henzl
http://popcorp.org
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user