Re: [LAU] Very low input from accoustic guitar pickup

From: Reuben Martin <reuben.m@email-addr-hidden>
Date: Thu Nov 22 2007 - 23:30:34 EET

Just because both guitar and your 1010 have quarter inch inputs
doesn't mean they are the same. A guitar pickup has a Hi-Z output, and
the 1010 is expecting a line-level input. They are not the same thing.
(having a battery doesn't mean a thing in regards to preamps, it means
it has an active rather than a passive pickup)

A mixer won't do much good either unless it comes with a Hi-Z input,
which is not common.

Most people set it up going from HI-Z into a DI box, and from there
into a preamp to get a line level signal. (There are some preamps with
Hi-Z inputs so that you can skip the DI box, but they are not very
common.)

-Reuben

On Nov 22, 2007 8:22 AM, lanas <lanas@email-addr-hidden> wrote:
> Le Mercredi, 21 Nov 2007 20:54:21 -0500,
> Joe Hartley <jh@email-addr-hidden> a écrit :
>
> > You need some form of preamp between the guitar and the 1010. The
> > guitar does not provide a strong enough signal for the 1010 to handle
> > properly. An inexpensive mixer will do the trick.
>
> That looks OK, but I'm hesitant at getting a mixer for this purpose.
> Can you give a few product names so I can check them out and see
> exactly what you mean by inexpensive mixer ? - Thanks.
>
> Al
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Fri Nov 23 00:15:01 2007

This archive was generated by hypermail 2.1.8 : Fri Nov 23 2007 - 00:15:01 EET